Maintaining Your Interactive Flat Panel Hardware; Checking The Interactive Flat Panel Installation; Cleaning The Screen - SMART Board 6000 series User Manual

CHAPTER 5
MAINTAINING YOUR INTERACTIVE FLAT PANEL

Maintaining your interactive flat panel hardware

If you properly maintain your interactive flat panel hardware, it will provide years of use.

Checking the interactive flat panel installation

Inspect your interactive flat panel installation frequently to ensure that it remains securely installed.
Check the mounting location for signs of damage or weakness that can occur over time.
l
Check for loose screws, gaps, distortions or other issues that could occur with the mounting
l
apparatus.
If you find an issue, contact a professional installer.

Cleaning the screen

Follow these instructions to clean the interactive flat panel screen without damaging its anti-glare
coating or other product components.
CAUTION
Do not use permanent or dry-erase markers on the screen. If dry-erase markers are used on
l
the screen, remove the ink as soon as possible with a lint-free, non-abrasive cloth.
Do not rub the screen with a dense or rough material.
l
Do not apply pressure to the screen.
l
Do not use cleaning solution or glass cleaner on the interactive flat panel screen, because
l
they can deteriorate or discolor the screen.
Avoid touching the reflective tape between the screen and the bezel, and ensure that this
l
strip stays dry. Damage to this strip affects touch interactivity.
To clean the screen
1. Turn off the room computer.
2. Press the Standby button
3. Flick the power switch beside the AC power inlet.
4. Wipe the screen with a lint-free, non-abrasive cloth.
25 smarttech.com/kb/170642
on the front control panel twice.