Chapter 2
Mounting your interactive flat panel
Before mounting your interactive flat panel
Choosing a location
Choosing a height
To mount your interactive flat panel on a wall, you require a team of professional installers.
This chapter is intended for installers. Installers should read this chapter along with the installation
instructions included with the interactive flat panel before they mount the interactive flat panel.
WARNING
Improper mounting of your interactive flat panel can result in personal injury and product
damage.
Before mounting your interactive flat panel
Do the following before mounting your interactive flat panel:
Review the environmental requirements in the interactive flat panel's specifications (see
l
Resources for decision makers on page 7).
Save all product packaging so that it's available if you need to transport the interactive flat
l
panel. If the original packaging isn't available, you can purchase new product packaging from
your authorized SMART reseller (smarttech.com/where).
Refer to local building codes to ensure the wall can support the weight of the interactive flat
l
panel specified in the following table and mounting equipment.
Model
SPNL-6055
SPNL-6065
Use a standard VESA 400 mm × 400 mm mounting plate (not included) to mount the
l
interactive flat panel on a wall.
9
smarttech.com/kb/170642
9
10
11
Weight
104 lb. (47.4 kg)
135 lb. 6 oz. (61.4 kg)