Removing And Transporting Your Interactive Flat Panel; Preventing Condensation; Maintaining Pens; Removing Your Interactive Flat Panel - SMART Board 6000 series User Manual

CHAPTER 5
MAINTAINING YOUR INTERACTIVE FLAT PANEL

Preventing condensation

Your interactive flat panel screen contains layers of glass that can collect condensation, especially
in the following conditions:
Temperature extremes with high humidity
l
Rapid changes in humidity, which can occur when you operate the product near water, such as
l
a pool, kettle or air conditioner ventilator
Direct exposure to sunlight
l
To evaporate condensation from your interactive flat panel
1. Remove the humidity source from the interactive flat panel, if possible.
2. Turn off the interactive flat panel.
3. Remove any moisture from the interactive flat panel with a smooth, dry cloth.
4. Leave the interactive flat panel turned off for 48 hours.

Maintaining pens

To prevent damage to your interactive flat panels' anti-glare coating, replace a pen if its nib
becomes worn. You can purchase replacement pens from the Store for SMART Parts
(see smarttech.com/Support/PartsStore).
Removing and transporting your
interactive flat panel
On occasion, you might need to remove your interactive flat panel from its current location and
transport it to another location.

Removing your interactive flat panel

To safely remove your interactive flat panel, use two or more professional installers.
WARNING
Do not attempt to move the interactive flat panel using your own strength. The interactive
l
flat panel is very heavy.
Do not move the interactive flat panel by connecting a rope or wire to the handles on the
l
back. The interactive flat panel can fall and cause personal injury and product damage.
27 smarttech.com/kb/170642