Connecting To Ac Power Source - KTI Networks KGS-2800 Installation Manual

CONNECTING
TO AC POWER
SOURCE
Figure 13: Inserting the AC power cord to AC socket to power on this switch
Step1.
Insert the AC power cord directly into the AC socket located at the front of the
switch.
Step2.
Plug the other end of the power cord into a AC power source.
Step3.
Check the front-panel LEDs as the device is powered on to be sure the POWER
LED is lit. If not, check that the power cable is correctly plugged in.
You can plug or remove AC power cord through the AC socket from
AC power source.
12