KTI Networks KGS-2800 Installation Manual page 5

RELATED
PUBLICATIONS
REVISION
HISTORY
Release
1.00
The switch is indoor device; if it will be used in outdoor
N :
OTE
environment or connects with some outdoor device, then it must
use a lightning arrester to protect the switch
W :
ARNING
Self-demolition on Product is strictly prohibited. Damage

caused by self-demolition will be charged for repairing fees.
Do not place product at outdoor or sandstorm.

Before installation, please make sure input power supply and

product specifications are compatible to each other.
To reduce the risk of electric shock. Disconnect all AC or DC

power cord and RPS cables to completely remove power
from the unit.
Before importing / exporting configuration please make sure

the firmware version is always the same.
After firmware upgrade, the switch will remove the

configuration automatically to latest firmware version.
The following publication gives specific information on how to
operate and use the management functions of the switch:
The User's Manual
This section summarizes the changes in each revision of this
guide.
Date
2011/12/08
v
Revision
A1