Applying Ac Power Supply; Applying Dc Power Supply - KTI Networks KGS-2423 Installation Manual

3. Turn the power to the switch on.

2.4 Applying AC Power Supply

If the purchased switch is with AC power input, one AC power cord which meets the specification of your
country of origin was supplied in package. Before installing AC power cord to the switch, make sure the AC
power is OFF and the AC power to the power cord is turned off.
AC power input specifications
Connector: IEC320 type
Power Rating: 100 ~ 240VAC, 50/60Hz
Voltage Range: 90 ~ 264VAC
Frequency: 47 ~ 63 Hz
Power Consumption: 39W max. (PoE power is excluded)

2.5 Applying DC Power Supply

If the purchased switch is with DC power input, the power connector is shown below:
-15-