KTI Networks KGS-2800 Installation Manual page 23

new cable installations,
Category 5e or
Category 6 cable should
be used. The Category
5e and 6 specifications
1000 MBPS GIGABIT ETHERNET COLLISION DOMAIN
Table 5: Maximum 1000BASE-T Gigabit Ethernet Cable Length
Cable Type
Category 5, 5e or 6 100-ohm
UTP or STP
Table 6: Maximum 1000BASE-SX Gigabit Fiber Cable Lengths
Fiber Size
62.5/125 micron
multimode fiber
50/125 micron
multimode fiber
Table 7: Maximum 1000BASE-LX/LHX/XD/ZX Gigabit Fiber Cable Length
Fiber Size
9/125 micron
single-mode fiber
1310nm
9/125 micron
single-mode fiber
1550nm
Table 8: Maximum 1000BASE-LX Single Fiber Gigabit Fiber Cable Length
Fiber Size
Single-mode
TX-1310nm
RX-1550nm
Single-mode
TX-1550nm
RX-1310nm
100 MBPS FAST ETHERNET COLLISION DOMAIN
Table 9: Maximum Fast Ethernet Cable Lengths
Cable Type
Category 5, 5e or 6 100-ohm
UTP or STP
include test parameters that are only recommendations
for Category 5. Therefore, the first step in preparing
existing Category 5 cabling for running 1000BASE-T is a
simple test of the cable installation to be sure that it
complies with the IEEE 802.3-2005 standards
Maximum Cable Length
100.m (328 ft)
Fiber Bandwidth Maximum Cable Length
160 MHz/km 220 m (722 ft)
200 MHz/km 275 m (902 ft)
400 MHz/km 500 m (1641 ft)
500 MHz/km 550 m (1805 ft)
Fiber Bandwidth Maximum Cable Length
N/A 10km (6.2 miles)
N/A 30km (18.64 miles)
50km (31.06 miles)
Fiber Bandwidth Maximum Cable Length
N/A 20km (12.42miles)
N/A 20km (12.42miles)
Maximum Cable Length
100.m (328 ft)
2
Connector
RJ-45
Connector
LC
LC
LC
LC
Connector
LC
LC
LC
Connector
BIDI
LC
BIDI
LC
Connector
RJ-45