B) Gprs Cellifo; C) Gprs Detach; D) Gprs Imei - Teldat Router User Manual

Note: The device, before each call, will always try and carry out an ATTACH to the
network in order to verify that it is still registered.
Example:
umts2/0 AT+gprs attach
AT+CGATT=1
OK

b) GPRS CELLIFO

Dumps the information stored in the module regarding the base station it is serving.
Not available for UMTS.

c) GPRS DETACH

Manually carries out a DETACH, de-register, to the GPRS or UMTS network.
Example:
umts2/0 AT+gprs detach
AT+CGATT=0
OK
+CGREG: 0

d) GPRS IMEI

Provides the module IMEI (International Mobile station Equipment Identity).
Example:
umts2/0 AT+gprs imei
AT+CGSN
500161111199050
OK
e) GPRS IMSI
Provides the SIM IMSI (International Mobile Subscriber Identity).
Example:
umts2/0 AT+gprs imsi
AT+CIMI
214031303057905
OK
f) GPRS LIST
Provides information on the radio link state, as well as the register in the network (mode and domain).
Example:
umts2/0 AT+gprs list
Last Measure:
UMTS preferred mode:
UMTS preferred domain:
UMTS radio access state: WCDMA PS
RSSI when connecting:
g) GPRS NEIGHBOUR
Provides information on the neighbor cells that can serve the module.
Not available for UMTS.
42s
AUTO
PS Only
10 (-93 dBm)
TELDAT ROUTER– UMTS Monitoring
III - 25
Doc.DM757-I
Rev.10.60