Enable; A) Enable Flow-Ctrl-Option; Frame-Size; Pin - Teldat Router User Manual

3.5. ENABLE

The ENABLE command permits you to enable the modem flow control.
Syntax:
gprs0/0 AT config>enable <parameter>
Example:
umts2/0 AT config>enable ?
flow-ctrl-option
umts2/0 AT config>

a) ENABLE FLOW-CTRL-OPTION

Enables flow control. When this parameter is enabled, flow control is available in the
interface. By default this parameter is disabled.
Syntax:
umts2/0 AT config>enable flow-ctrl-option
Example:
umts2/0 AT config>enable flow-ctrl-option
umts2/0 AT config>

3.6. FRAME-SIZE

Configures the maximum base interface frame size between 576 and 4096 bytes.
Example:
umts2/0 AT config>frame-size 2048
3.7. NO
Configures the default values.
Syntax:
umts2/0 AT config>no <command>
Example:
umts2/0 AT config>no ?
always-attached
frame-size

pin

speed
umts
wait-time
umts2/0 AT config>
3.8. PIN
Configures the PIN number for the SIM inserted in the module.
Example:
umts2/0 AT config>pin plain 1235
Enable flow control
In PDP context disconnection perform detach
TELDAT ROUTER– UMTS Configuration
II - 13
Doc.DM757-I
Rev.10.60