Table of Contents
Advertisement
8.1.1.3 Record Setup
(1) Record Select
Enable/disable the channel number to record video
i
The channels which could be recorded should be enabled in the CAMERA SELECT first.
(2) Audio Record CH
Enable/disable channel number audio recording. To record sound, make sure the
microphone is connected to the unit
(3) Record Mode
Select D1/CIF recording mode. Under D1 mode, the resolution of video recording is 720
x 480/720 x576. Each channel is recorded at a maximum frame rate of 15fps. You can
switch to view the video in single full screen or 4 split screen. Whereas in CIF mode,
video recording is at resolution of 360 x 240/360 x 288, but each video is recorded in
30fps/25fps (NTSC/PAL).
(4) Record Frame Rate
Set the number of frames per second to be recorded. Refer to the table below for the
available record frame rate settings. The higher the frame rate is, it uses more hard disk
space
Video Standard
Record Mode
D1
CIF
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
NTSC
60, 20, 4
120, 60, 40, 20, 4
PAL
48, 20, 4
100, 48, 20, 4
48
Advertisement
Table of Contents
