Avermedia AVerDiGi EB1704 HB DVD User Manual
  1. Manuals
  2. Brands
  3. Avermedia Manuals
  4. Software
  5. AVerDiGi EB1704HB
  6. User manual
Avermedia AVerDiGi EB1704 HB DVD User Manual

Avermedia AVerDiGi EB1704 HB DVD User Manual

Hide thumbs Also See for AVerDiGi EB1704 HB DVD:
Table of Contents

Advertisement

Quick Links

Download this manual
AVerDiGi
EB1704 HB DVD
EB1504 NET DVD
EB1504 NET
User's Manual
http://www.avermedia.com
http://www.averdigi.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVerDiGi EB1704 HB DVD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Avermedia AVerDiGi EB1704 HB DVD

Summary of Contents for Avermedia AVerDiGi EB1704 HB DVD

  • Page 1 AVerDiGi EB1704 HB DVD EB1504 NET DVD EB1504 NET User’s Manual http://www.avermedia.com http://www.averdigi.com...
  • Page 2 The information contained in this documentation is subject to change without notice. In no event will AVerMedia be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages.
  • Page 3 WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR INAPPROPRIATE ITEM IN THE PACKAGE, PLEASE CONTACT WITH YOUR LOCAL DEALER. WARRANTY VOID FOR ANY UNAUTHORIZED PRODUCT MODIFICATION NOTICE - INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE...

  • Page 4: Table Of Contents

    Table of Contents Chapter 1 Introduction ...............1 Package Content..................1 Features and Specifications ............... 1 Front Panel ....................2 Back Panel....................3 Setting Up the DVR Unit ................4 1.5.1 Installing Hard Disk for EB1704HB DVD/EB1504NET DVD ....4 1.5.2 Installing Hard Disk for EB1504NET............
  • Page 5 To Run the ImageVerification ..............38 Chapter 7 iEnhance ................39 To Use iStable ..................40 Chapter 8 Using the Remote Programs..........41 Familiarizing the Web Viewer Buttons............43 8.1.1 To Setup Remote System Setting............45 8.1.1.1 System Setup................... 45 8.1.1.2 Camera Setup.................. 46 8.1.1.3 Record Setup ...................
  • Page 6 10.4.2.1 To Add and Remove DVR Server ..........73 10.4.3 Camera Setup ..................73 10.4.4 E-MAP Setup ..................74 10.4.4.1 To Set Up the E-Map ..............74 10.4.4.2 To Use the E-Map ............... 77 10.4.5 Alarm Setting ..................78 10.4.5.1 To setup an alarm condition............

  • Page 7: Chapter 1 Introduction

    Package Content EB1504NET DVD unit EB1504 NET unit (1) EB1740HB DVD unit (1) AVerDiGi EB1704 HB DVD/EB1504 NET DVD/EB1504 NET unit (2) Remote Control (batteries included) (3) Quick Installation Guide (4) Power Cord * The power cord varies depending on the standard power outlet of the country where it is sold.

  • Page 8: Front Panel

    Support audio recording via internet Support USB backup to pen drive Support DVD-RW backup(up to 4.2G) Support network, playback, and recording simultaneously Supports 1 hard disk drive (not included) Full-screen resolution: Display: 720 x 480 (NTSC) / 720 x 576 (PAL) Recording: 720 x 480 (NTSC) / 720 x 576 (PAL) Recording frame rate: D1 mode: 60fps (NTSC) / 50fps (PAL)

  • Page 9: Back Panel

    Name Function Temporarily freeze the video playback Stop video playback Use the buttons in navigating OSD menu to : Move to the left and right Change the setting Make a selection Receive the signal from the remote control to operate the unit IR Sensor Indicate running state of the hard disk.

  • Page 10: Setting Up The Dvr Unit

    ® incompatibility caused by the usage of these hard disks, even if AVerMedia has expressly advised about the risk of such damages. The entire risk arising out of the use of any information attached here with is borne by the recipient.
  • Page 11 Loosen the hard disk rack 4 screws Secure the brackets on the hard disk Connect the end of the IDE cable and the Secure the hard disk inside the unit power connector to the hard disk Close the case cover and tighten screws...

  • Page 12: Installing Hard Disk For Eb1504Net

    1.5.2 Installing Hard Disk for EB1504NET The DVR unit allows you to install up to two hard disks. Before installing the hard disk, make sure to set the hard disk master/slave jumper setting. Adjust the jumper setting according to the instructions on the hard disk label. Please set the jumper of hard disk as Master while there is only one hard disk inside the DVR.

  • Page 13: Connecting Devices

    1.5.3 Connecting Devices The back panel of the DVR unit, user can connect up to 4 video cameras, 4 sensor devices, 1 alarm device, 4 audio in devices and output video to a TV or CRT/LCD monitor. Connecting the unit to a pen drive or external hard disk through USB connection for backup, then use the bundled software enables user to transfer, playback and segment the video.

  • Page 14: Connecting The Audio/Sensor/Relay/Ptz Camera Device

    1.5.4 Connecting the Audio/Sensor/Relay/PTZ Camera device The Audio In, Sensor, Alarm, and PTZ camera ports enable you to connect 3 audio inputs, 4 sensor inputs, 1 relay outputs, and 1 PTZ camera. Just connect the external audio input device, sensor, relay, and PTZ camera pin directly to the pinhole.

  • Page 15: Chapter 2 Operating The Dvr

    Chapter 2 Operating the DVR Familiarizing the Remote Control Buttons Use the Remote control to operate the OSD menu on surveillance screen. EB DVR (10) (11) (12) (13) (14) (22) SELECT MENU (15) (21) LEFT RIGHT (16) ▲ FOCUS + DOWN ZOOM + ▼...
  • Page 16 Button Function As a number key for entering password Set a playing recorded video from A point to B point segment and repeat playing on surveillance screen(See 2.1.1) Pause the playing (10) To play the video (11) Decrease the video playback at the speed of 2x, 4x 8x or 16x (12) Fast play the video playback at the speed of 2x, 4x 8x or 16x (13)

  • Page 17: Using Ab Repeat Function

    Button Function Make a selection (21) Enter sub-menu (22) Start video recording 2.1.1 Using AB Repeat Function AB Repeat function allow user to set a video segment from A to B point and play on the surveillance screen until user stop. User also can backup AB Repeat file to pen drive or external hard disk (See 2.1.2).

  • Page 18: Controlling Ptz Camera

    2.1.3 Controlling PTZ Camera Using remote control, user can easily control PTZ camera at local site. Before starting, please go to OSD menu to enable PTZ control (see 3.1 Menu Function: Setup). 2.1.3.1 To Enter the PTZ Mode To control PTZ camera, user need to enter the PTZ mode first. Press button, and camera channel number button ( .

  • Page 19: Using The Dvr For The First Time

    ZOOM + ZOOM - To zoom out PTZ camera To zoom in PTZ camera Using the DVR for the First Time Upon connecting the power, the unit automatically detects the status of the hard disk. The hard disk must be formatted before user can use it with DVR. If you are prompt to format the hard disk, press (select) for YES to format the hard disk (menu) for NO to remain unchanged.
  • Page 20 D1 (A) CIF(A) Full mode Screen Preview QUAD model Preview When you are in full screen preview, press the following buttons on the remote control to switch to different channel, or preview all 4 channels: CH1: Camera1 CH2: Camera 2 CH3: Camera 3 CH4: Camera 4 QUAD: 4-Channel...

  • Page 21: Playback The Video

    Playback the Video The DVR system can record and playback video simultaneously. Therefore, user doesn’t need to stop recording while playback the video. Press SEARCH METHOD TIME SEARCH Use the buttons to go up and EVENT LIST ▲ ▼ down and select TIME SEARCH or EVENT LIST. Then, press to make a selection.
  • Page 22 The “ ” play symbol would appear beside the channel number when you are previewing in playback mode. To playback the recording files during the daylight saving period; please select Event List to find the event that user wants to playback. On the first day and last day of daylight saving only has one record in Time search, so user can’t find the specific playback file in time search.

  • Page 23: Chapter 3 Osd Navigation Tree

    Chapter 3 OSD Navigation Tree The follow figure is an OSD menu tree map. To call out the OSD menu, press on the remote control. PASSWORD SETUP MAIN MENU VIDEO RECORD PASSWORD SETUP CURR ENT CA MER A 1 CA MER A SELECT ANA LOG PASSWORD SETUP...

  • Page 24: Menu Function

    Menu Function If the unit is currently recording the video, user may have to stop video recording to change the settings. Use remote control to navigate in the OSD menu. The red frame turns yellow when you are making a selection. OSD MENU Description MAIN MENU...
  • Page 25 OSD MENU Description MAIN MENU RECORD FRAMERATE : CAMERA SELECT Set the number of frames per second to be recorded. VIDEO RECORD Refer to the table below for the available record frame AUDIO RECORD AUDIO MUTE rate settings. The higher the frame rate is, it uses more RECORD MODE hard disk space RECORD FRAMERATE...
  • Page 26 OSD MENU Description HARD DRIVE SETUP OVERWRITE ENABLED : OVERWRITE ENABLED Enable/disable overwriting the earliest record when the HD1 SIZE 156,012MB HD1 USED 250MB hard disk space runs out. By default, the HDD overwrite HDD FORMAT setting is enabled HDD FORMAT : For security purpose, you may have to enter the password to format hard disk To format hard disk:...
  • Page 27 OSD MENU Description NETWORK SETUP NETWORK SETUP: IP MODE STATIC Setup the network parameters for the internet or NW ENABLE VIDEO PORT 0080 intranet remote monitor or playback. UPGARDE PORT 5005 IP MODE: The system provides 3 types of IP setup mode – Static, DHCP, and PPPOE.
  • Page 28 OSD MENU Description DHCP: Assign the IP address by local DHCP NETWORK SETUP IP MODE DHCP server to DVR system. Use ▲ ▼ NW ENABLE VIDEO PORT buttons to go up and down and select DHCP, and UPGARDE PORT 5005 then press to make selection.
  • Page 29 OSD MENU Description NETWORK SETUP IP MODE STATIC NW ENABLE VIDEO PORT 0080 UPGARDE PORT 5005 GET IP NOW! WAITING... When DVR system get an IP address, the information will display as below: NETWORK INFORMATION IP ADDRESS 000.000.000.000 000.000.000.000 SUB NET GATEWAY 192.168.153.254 192.095.000.001...
  • Page 30 OSD MENU Description NETWORK SETUP VIDEO PORT: IP MODE STATIC A port for the remote connection. Any port can be NW ENABLE VIDEO PORT 0080 assigned as a video port, except the ports already used UPGARDE PORT 5005 by the network services. The default video port is 80. buttons to go up and down and ▲...
  • Page 31 OSD MENU Description USB BAKCUP TIME SET START : 2006 / 05 / 04 10 : 00 : 01 : 2006 / 05 / 05 13 : 08 : 13 BACKUP CHANNEL USAGE OF USB WILL STOP NETWORK 89MB BACKUP SIZE FUNCTIONS! BACKUP EXECUTE YES(SEL ECT) / NO(MENU)
  • Page 32 OSD MENU Description • How to Backup: DVD BAKCUP TIME SET buttons to go up and down and ▲ ▼ START : 2006 / 05 / 04 10 : 00 : 01 : 2006 / 05 / 05 13 : 08 : 13 select USB BACKUP, and then press BACKUP CHANN EL to move left and right.
  • Page 33 OSD MENU Description SUBMENU REMOTE ID: AUTO RECORD Assign the ID number for multiple DVR system remote MULTIPLE REMOTE REMOTE ID controls. When there are more than one DVR systems, VIDEO SYSTEM NTSC user can enable MULTIPLE REMOTE function, and PASSWORD SETUP VIDEO ADJUSTMENT then assign REMOTE ID to each DVR system.
  • Page 34 OSD MENU Description VIDEO ADJUSTMENT VIDEO ADJUSTMENT : CAMERA BRIGHTNESS Select the camera number and set to adjust the video CONTRAST brightness, contrast, hue, and saturation value. SATURATION RESET TO DEFAULT VALUE TIME SETUP TIME SETUP: DATE 2007 / 03 / 12 15 : 45 : 57 Setup system date, time, daylight saving, and enable TIME...
  • Page 35 OSD MENU Description SENSOR SETUP SENSOR REC TIME : SENSOR REC TIME 010 SEC Set the amount of time (in second) to start record when ALARM OUT TIME 010 SEC CHANNEL - 1 NOT INSTALLED the sensor has triggered CHANNEL - 2 NOT INSTALLED CHANNEL - 3 NOT INSTALLED...
  • Page 36 OSD MENU Description PTZ SCAN PTZ SETUP: CAMERA To enable PTZ camera control by remote control and PTZ CONTROL PTZ ID setup PTZ camera parameters. PROTOCOL PELCO-D BAUD RATE 2400 Press and select SUBMENU → PTZ AUTO PAN DWELL TIME 05 SEC SETUP.

  • Page 37: Chapter 4 Using The Usb Playback Console

    Chapter 4 Using the USB Playback Console Recommended system requirements Pentium®4 2.4GHZ or above Windows®2000/ XP DDR 256 MB Graphic function must support DirectDraw Audio card or built-in Speaker 1 available USB2.0 port Installing the USB Playback Console To install the USB Playback Console: Place Installation CD into the CD-ROM drive.

  • Page 38: Running The Usb Playback Console

    Running the USB Playback Console To run the application, click the icon on the PC desktop (10) (11) (17) (12) (13) (16) (15) (14) Name Function Video playback screen To select the video file for playing. The playback application supports *.dvr and *.avf file. Open File - DVR Recorded File (HD): To playback the recorded video from the hard disk which was recording video on the DVR system.
  • Page 39 Name Function Select the event you want to playback. The event list only available when user select to playback in DVR Recorded File(HD). Event List Full screen Use the entire area of the screen to only display the video. To return, press the right button of the mouse or ESC on the keyboard.

  • Page 40: To Cut And Save The Portion Of The Recorded Video

    Name Function Turn on and off the sound (17) Sound /Sound bar Increase and decrease the volume 4.3.1 To Cut and Save the Portion of the Recorded Video Use the Playback Control buttons or drag the bar on the playback progress bar and pause on where you want to start the cut.
  • Page 41 When open the backup video file, just locate the where backup file folder is. And then, Playback Date/Time Selection window appears. Select the date and time and click OK.

  • Page 42: Chapter 5 Backup Recorded Video File

    Chapter 5 Backup Recorded Video File Recommended system requirements Pentium®4 2.4GHZ or above Windows®2000/ XP DDR 256 MB Graphic function must support DirectDraw Audio card or built-in Speaker 1 available USB2.0 port Familiarizing with HDD Backup Application (10) Name Function All recorded video No.: the list order number events list...

  • Page 43: To Backup Recorded Video File

    Name Function Target Path To locate on where user want to save the file Event (%) Display the backup progress rate of event in percentage Total (%) Display the total backup progress rate in percentage Stop Stop backup progress Start Start backup progress Select all listed recorded video events.

  • Page 44: Chapter 6 Imageverification

    Chapter 6 ImageVerification Image Verification is a watermark-checking program to identify the authenticity of a saved image (e.g. by snapshot). This program can only verify uncompressed bmp image files. To Run the ImageVerification To run the ImageVerification application, click the Watermark button on USB Playback Console main interface.

  • Page 45: Chapter 7 Ienhance

    Chapter 7 iEnhance The bundled iEnhance is a video editing tool and can only be used with *.dvr video file. It allows you to adjust the video picture quality, segment and save the selected portion of the video, zoom in and out the image, and print or save the screen shot. You can also save the setting and apply it on other files.

  • Page 46: To Use Istable

    Name Function (12) Noise Reduce Adjust the softness and repair the damaged colours. (13) Sharpness Improve the overall image by enhancing edges. This gives the image more depth. (14) Effects Gray Scale: convert the image into black and white (monochrome). Normalize: adjust the brightness intensity.

  • Page 47: Chapter 8 Using The Remote Programs

    Chapter 8 Using the Remote Programs User can use Microsoft Internet Explorer to access DVR system by entering the IP address. To use this feature, make sure that you PC and DVR server both are connected to the internet and the Network feature is enabled. Accessing this feature for the first time you will be prompted by your browser to install WebCamX.cab, allow the installation and you should be able to connect and login afterwards.
  • Page 48 is 111111) and select the type of network. Superuser has the authority to remote setup the DVR system configuration on Web Viewer. Changing the Superuser and User default password is strongly recommended.

  • Page 49: Familiarizing The Web Viewer Buttons

    Familiarizing the Web Viewer Buttons Right-clicking on the Web Viewer video screen, enables you to start video recording, change video quality, switch camera and enable/disable DirectDraw. Name Function (1) DirectDraw Enhance the video quality. Not all graphic cards can support this function. If you can not see the screen display correctly or screen is messed, please check with VGA card vendor.
  • Page 50 Name Function (12) Select cameras to Select to the view camera from different server. In Select Camera view dialog box, Display column, click to enable/disable viewing the camera. Click Add Server and select the server type between DVR and IP Cam to add.

  • Page 51: To Setup Remote System Setting

    8.1.1 To Setup Remote System Setting Click OK to exit and save the setting and Cancel to exit without saving the setting. The setting here applies to Remote DVR system only. After changed the DVR system setting, refresh your web browser in order to apply the new setting to the DVR system.

  • Page 52: Camera Setup

    (Greenwich Mean Time) time zone. Server 1/Server 2 Fill in the network time server URL or IP address (clock.stdtime.gov.tw or time.stdtime.gov.tw) (4) DLS Setup daylight saving settings. Enable DLS To enable/disable daylight saving function. START Setup daylight start up date and time. Setup daylight stop date and time.
  • Page 53 Video Adjustment Select the camera and adjust the Brightness, Contrast, Hue and Saturation of the selected camera. Default Value Set the video value back to default IP Camera(only support for EB1704HB DVD) Protocol / Resolution When the camera is an IP camera, select the protocol and resolution of IP camera.

  • Page 54: Record Setup

    8.1.1.3 Record Setup (1) Record Select Enable/disable the channel number to record video The channels which could be recorded should be enabled in the CAMERA SELECT first. (2) Audio Record CH Enable/disable channel number audio recording. To record sound, make sure the microphone is connected to the unit (3) Record Mode Select D1/CIF recording mode.

  • Page 55: Alarm/Sensor Setup

    (5) Video Quality Select the video quality setting from BEST, HIGH, MEDIUM, GOOD, NORMAL or LOW. (6) Auto Record Enable/disable continue auto recording when interrupted (i.e., power breakdown, video playback or configuration setup). It continue recording after 10 second of idleness. This is applicable in Always Record mode under schedule setting.
  • Page 56 (2) Sensor Setup Sensor Status Customize the initial state of the attached sensor for every camera. Refer to the table below to customize the sensor state. Not installed: Indicates that there is no sensor connected Normal open: Indicates that the initial state of the sensor is normal open. Video recording initiate when there is a changes in the sensor state Normal close: Indicates that the initial state of the sensor is normal close.

  • Page 57: Network Setup

    8.1.1.5 Network Setup (1) IP Mode Static IP Assign a fixed and global IP address for the DVR system IP: Assign a constant IP address which real IP addresses from ISP. Mask: Enter the subnet mask of the IP address which user has assigned to DVR system.

  • Page 58: Password Change

    A password use to access DDNS to register the domain name. MAC address of the DVR system is the key for user to register the domain name on AVerMedia DDNS web site. To find MAC address of your DVR system, follow NETWORK SETUP...

  • Page 59: Familiarizing The Remote Console Buttons

    Familiarizing the Remote Console Buttons (12) (11) (10) (13) Name Function (1) Exit Close the Remote Console. (2) Audio button Enable/disable the sound. (3) Split Screen Mode Select from six (6) different split screen type to playback the recorded video file of all the camera, or one camera over the other or alongside on a single screen.
  • Page 60 save the setting and Cancel to exit without saving the setting. (1) Storage Path Set the directory on where to save the data. When there is not enough free space to record one hour data, the system automatically replaces the oldest data.

  • Page 61: Familiarizing The Webviewer Ptz Buttons

    Familiarizing the WebViewer PTZ Buttons Name Function (1) Direction buttons Adjust and position the focal point of the PTZ camera. Click the center to pan automatically. (2) Zoom +/- Zoom in and out the image. (3) Select PTZ Choose to enable/disable the PTZ camera. In the Select PTZ dialog box, Select column, click to enable/disable viewing and controlling the PTZ camera.
  • Page 62 To Make a Selection: 1. Select the date in the calendar. Use buttons to shift the calendar to the left or right. 2. In the table below, click on the blue block to select and open the recorded file. The blue block turns red when it is selected. The block that appears in white doesn’t have data.

  • Page 63: Familiarizing The Local Playback Buttons

    8.4.1 Familiarizing the Local Playback Buttons (13) (12) (11) (10) Name Function Select from six (6) different split screen type to playback the (1) Split Screen Mode recorded video file of all the camera, or one camera over the other or alongside on a single screen.

  • Page 64: To Cut And Save The Wanted Portion Of The Recorded Video

    Name Function (7) Playback Switch to Playback mode. This allows you to view the recorded video file. (8) Status bar Display the record date, time, HDD capacity in preview mode and play speed in playback mode. (9) Camera ID Show the number of cameras that are being viewed. When you are in single screen mode, click the camera ID number to switch and view other camera.

  • Page 65: Familiarizing The Download And Playback Buttons

    8.4.2 Familiarizing the Download and Playback Buttons Name Function (1) Progress bar Show the progress of the file being played. You may move the bar to seek at any location of the track. (2) Playback Begin: Move at the beginning of the video file. Control Buttons Previous: Go back to the previous frame.

  • Page 66: Chapter 9 Using Handy Viewer To Access Dvr Server

    Chapter 9 Using Handy Viewer to Access DVR server Users can use a mobile phone to access the NV DVR through Internet. Make sure your mobile phone support IE browser and is connected to the internet. To access the NV DVR server, open IE browser and enter http://enter server IP or domain name here/mobile.

  • Page 67: To Install Pda Viewer From The Internet

    When done, click OK. 9.1.2 To install PDA Viewer from the Internet Make sure you are connected to the internet. 1. Open the web browser and enter the server IP. Then click the hyperlink Download PDA-Viewer. 2. When the Download dialog box appears, enable Open file after download and click Yes.

  • Page 68: To Use The Pda Viewer

    9.1.3 To Use the PDA Viewer 1. Run the PDA-Viewer in the Programs. Familiarizing the PDA Viewer buttons (10) Name Function (1) Connect Hook up to the NV DVR server. Make sure you are connected to internet. When the iView screen appears, click Add to add DVR server. Enter the server IP, port, user ID, password and select the connection type.

  • Page 69: To Playback In Pda Viewer

    3. To change the video quality, enable/disable audio, and select to display different camera, tap on the video screen longer the pop up menu will appear. 9.1.4 To Playback in PDA Viewer 1. Run the PDA-Viewer in the Programs. 2. Hook up to the NV DVR server. 3.

  • Page 70: Using Java-Viewer To Access Dvr Server

    11. User can change the relay status. Select the relay and tap on video screen longer the pop up menu will appear, and then, select the status (ON, OFF, Trigger) Using Java-Viewer to Access DVR Server Using the mobile phone within Symbian Smart Phone OS to access the NV DVR through Internet.

  • Page 71: To Use The Java-Viewer

    9.2.1 To Use the JAVA-Viewer Run the JAVA-Viewer program. Enter the DVR IP address, port number, user ID, and password. Please refer to your DVR server setting for that information. And then, select the Connect to connect to DVR server. Click Yes to accept the data from DVR server.

  • Page 72: Chapter 10 Using Central Managment System

    Chapter 10 Using Central Managment System ® The AVerMedia CM3000 is a central management system that enables user to monitor up to 1000 DVR servers (optional) through an internet connection. The CMS system also automatically records and displays video when an event has occurred on the remote side of the DVR server.

  • Page 73: Installing The Cm3000 In Windows Xp/2000

    10.2 Installing the CM3000 in Windows XP/2000 1. Place the installation CD into the CD-ROM drive then click Utility. And select the CM3000 folder and click setup.exe. And then, follow the on-screen instructions. 2. Please carefully read the license agreement. Click Yes to accept the agreement.

  • Page 74: Using The Cms Application

    Programs > DSS > CMS > CM3000. For security purposes, some of the features would require you to enter a User ID and Password before they can be accessed. When the Authorization dialog box appears, key in your User ID and Password. (If this is the first time to enter CMS system, enter the one you have registered when installing the software.) 10.3.2 Using the CMS Application When an alarm occurred on the DVR server, the video is transmitted to the CMS...
  • Page 75 (11) (10) Name Function (1) Exit Call up the Logout dialog box. In the logout dialog box, you may do the following: - Click Exit to close the CMS program. Only the administrator is authorized to access this command. - Click Login to sign-in as a different user. - Click Cancel to close the Logout dialog box.
  • Page 76 Name Function automatically when the CM software starts up. The network is using port 80 so please make sure you are not running any web server or application that locks port 80 on the PC with the CM3000 software. (6) Setup Configure the CMS system settings.

  • Page 77: Customizing The Cms System

    10.4 Customizing the CMS System In the CMS application, click the button to customize the CMS system. When the CMS configuration setup selection appears, select and click the buttons you want to change the setting. 10.4.1 System Setting In the System Setting dialog box, click OK to accept and start to reload the new setting, and Cancel to exit without saving.

  • Page 78: To Set The System To A Different Language

    4. The text below the Alarm Record path text box shows the hard disk free space and total space in parenthesis. 5. In the System Setting dialog box, click OK to start reloading the new setting and Cancel to exit without saving the new setting. 10.4.1.2 To Set the System to a Different Language 1.

  • Page 79: To Add And Remove Dvr Server

    10.4.2.1 To Add and Remove DVR Server 1. Click Setup. 2. In the Authorization dialog box, enter the administrator User ID and Password. 3. Click DVR. 4. In the DVR Setup section, click Add to insert, Delete to remove and Edit to modify DVR server setting.

  • Page 80: E-Map Setup

    the Camera Select window. 5. Select the camera that user wants to add, and then click Add button. The camera will be added to Monitor Layout window. User can add up to 64 cameras by select the camera display format from 4x4, 5x5, 6x6, 7x7, and 8x8 format.
  • Page 81 (7) Click OK to save the setting and exit the E-Map interface. (8) Click Cancel without saving the setting and exit the E-Map interface. 10.4.4.1.1 Add a New Map Click button In the Authorization dialog box, enter the administrator User ID and Password Click E-Map button Click Add Map button and the Map setting window will show up.
  • Page 82 10.4.4.1.2 Add a DVR Server 1. Click button 2. In the Authorization dialog box, enter the administrator User ID and Password 3. Click E-Map button 4. Click Add DVR button and the Add DVR window will show up. 5. Select the DVR server from the Add DVR window and click OK.

  • Page 83: To Use The E-Map

    User also can right click the mouse button on the map, a function list window will show up. User can select the function to add, delete, and edit the map. 10.4.4.2 To Use the E-Map When the alarm has been activated, the DVR icon blinks and turns red. 1.

  • Page 84: Alarm Setting

    When the setup mode is active in E-Map interface, the setup mode will not work in CMS main application. To switch back the setup mode in CMS main application, click OK or Cancel to exit the setup mode in E-Map interface. 6.
  • Page 85 (1)Mail Server Enter the SMTP Server and port. If your e-mail system requires user identification, enable the Authentication check box and enter User ID and Password. (2)Mail To check if it is working, click the Test Account button. Enter the sender e-mail address. From: To and CC: Enter the recipient email address and separate it with comma or a semicolon (;).

  • Page 86: User Setting

    1. Select the port number in ComPort drop down list from where the GSM/GPRS modem is connected. 2. Click Modem Setup button to automatically detect the Modem Baud Rate. 3. In Local Phone Number text box, enter the GSM SIM card phone number. 4.

  • Page 87: To Playback The Video

    10.5.1 To Playback the video 1. Click 2. In the DVR Playback select window, select DVR server and Local Playback to play video from the local hard disk or Remote Playback from the remote DVR server. 3. For Local Playback, user can select to preview 16 channels at a time. Only the cameras previously selected in Monitor and with the Record button enabled /recorded can be played back.

  • Page 88: Using The Local Playback Application

    10.5.2 Using the Local Playback Application (17) (16) (15) (14) (13) (12) (11) (10) Name Function (1) Split Screen Select from six (6) different split screen types to playback the recorded Mode video file of all the cameras, or one camera over the other or alongside on a single screen.

  • Page 89: Using The Remote Playback Application

    Name Function (6) Date Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. The numbers from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 represent the camera ID.

  • Page 90: To Cut And Save The Wanted Portion Of The Recorded Video

    Name Function Play: Play the recorded video file. (2) Playback Control Buttons Faster: Play the recorded video file at the speed of 2x, 4x, or 8x. Next: Go to the next frame. End: Go to the end of the recorded video file. (3) Date Open other file.

  • Page 91: To Search Using The Event Search

    every 10 Seconds of that minute, every Second of that 10 seconds. To go back, click . To view from the selected frame and close event search, click 10.5.3.3 To Search Using the Event Search 1. Click on the video screen on where you want to search. 2.

  • Page 92: Using The Event Viewer

    10.5.4 Using the Event Viewer Show the record of activities that take place in the system. To filter the records, select and click the option button to only display Alarm, Motion, DVR Reboot, HDD fail, Login DVR, Connection Success, Connection Loss or All Event. Click Refresh to update the list and Save to save the list in *.txt format.

  • Page 93: Appendix A Registering Domain Names

    Appendix A Registering Domain Names DDNS (Dynamic Domain Name Service) is a data query service mainly used on the Internet for translating domain names into Internet addresses. It allows remote clients to intelligently search dynamic servers without any previous enquiring for servers’...

  • Page 94: Appendix B Dual Monitors Setting

    Appendix B Dual Monitors setting Video configuration is different for each different VGA chipsets. Please follow the steps below to setup the dual monitors display. Graphic card with ATi chipset 1. Enter the ATI Catalyst Control Center, user can click the short-cut or right click on the screen.
  • Page 95 5. If user selected the Advanced mode, click the View button. 6. In Display Manager, right click on the second Display on the right side and select Extend Main onto monitor. 7. Adjust each monitor resolution to 1024x768.

  • Page 96: Graphic Card With Nvidia Chipset

    Graphic card with NVIDIA chipset 1. Click the NVIDIA nView, and select the Dualview mode. 2. Adjust each monitor resolution to 1024x768. 3. To review if the display mode is correct, you can check the task bar. The task bar will show on the first monitor only. Monitor 1 Monitor 2...

  • Page 97: Warranty Notice

    Any other cause which does not relate to a product defect 3. Cartons, cases, batteries, cabinets, tapes, or accessories used with product 4. AVerMedia does not warrant that this product will meet your requirements; it is your responsibility to determine the suitability of this product for your purpose WHAT WE WILL AND WILL NOT PAY FOR We will pay labor and material expenses for covered items.

This manual is also suitable for:

Averdigi eb1504 net

Table of Contents