Setting Up The Dvr Unit; Installing The Hard Disk - Avermedia AVerDiGi SEB3104H User Manual

1.4.1

Setting Up the DVR Unit

1.4.2 Installing the Hard Disk

The DVR unit allows user to install 1 SATA hard disks inside the DVR unit.
i For hard disk spec, please referring to
AVerDiGi EB Series → AVerDiGi SEB3104H → Hardware Recommendations
The "compatible hard disks" indicated in the above recommendation list only means that these
commercially available hard disks were tested with AVerMedia
under normal operation conditions. AVerMedia
explicitly, implied or statutory with respect to the reliability of the hard disk function or its
compatibility. In no event AVerMedia
interruption of clients, lost profits, loss of programs or other data on your information handling
system or otherwise. This includes direct, indirect, incidental, special, or consequential
damages, resulting from the incompatibility caused by the usage of these hard disks, even if
®
AVerMedia
the use of any information attached here with is borne by the recipient.
Follow the illustrated instructions below to install the hard disk:
1. Loosen all screws
3. Secure the brackets on the hard disk
has expressly advised about the risk of such damages. The entire risk arising out of
http://www.avermedia.com/AVerDiGi/Product/
®
does not guarantee or provide warranties,
®
shall be liable for damages, with respect to any business
2. Push the cover backward and lift
4. Connect the end of the SATA cable and the
power connector to the hard disk
5
→
®
products and functioned well