Paper Jam In The Bypass Tray; Paper Jam In Trays 1 - 4; Paper Jam Inside Cover A - Xerox DocuPrint C2255 Quick Referenc Manual

Paper Jam in the Bypass Tray

1. Inspect the area of the paper tray where the
paper enters the printer and remove the
jammed paper.
If the paper is torn, check to make sure that
there are no pieces of paper left inside.
Important
• If there are multiple sheets of paper loaded in the
bypass tray, remove all of the paper.

Paper Jam in Trays 1 - 4

Important
• Pulling out a tray without confirming the location of the
paper jam can tear paper and cause pieces of paper to
be left in the machine. This can cause a malfunction. Be
sure to check the location of the paper jam on the left
side of the control panel before clearing the jam.
1. Pull out the paper tray indicated on the
display as the location of the paper jam.
2. Remove the jammed paper and any paper
that is wrinkled.
If the paper is torn, check to make sure that
there are no pieces of paper left inside.
3. Gently slide the tray back in as far as it will
go.

Paper Jam Inside Cover A

Important
• When removing paper, take care not to touch the
transfer belt (the black film belt) inside the cover on the
upper left side. Scratches, dirt, or oil from your hands on
the belt can reduce print quality.
• There may be some toner on the transfer roller.
However, this does not affect image quality.
1. Lower the bypass tray. Next, while raising
the release lever, gently open cover A.
Clearing Paper Jams
51