Table of Contents
Advertisement
10. Close the drum cartridge cover.
11. Rotate the lever to the right to lock it.
12. Close the front cover.
Replacing the Waste Toner
Bottle
Toner that remains on the drum after printing is
complete is gathered into the waster toner bottle.
The following messages appear on the printer's
control panel when the waste toner bottle is near
or reaches the end of its life.
Message
Ready to print
The waste toner bottle
needs to be replaced soon.
ReplaceContainerR5
There is enough capacity to
print approximately
1500
Replace Waste Toner
The printer will stop and
Container R5
become unable to print.
Replace the waste toner
bottle using the procedure
under "Replacement
Procedure" (P. 75).
*1
: The page yield of each consumable varies
depending on print requests, documents printed,
and how often the power is switched on/off. For
more information, refer to "Life of Consumables
and Regular Replacement Parts" (P. 82).
Important
• Make sure that the power is on when replacing the
waste toner bottle. Switching the power off erases the
print data in the printer and information accumulated in
the memory.
• When replacing the waste toner bottle, waste toner can
spill and soil the floor. Spread some paper on the floor
before starting the replacement procedure.
Replacement Procedure
Before replacing the waste toner bottle, clean the
LED scanners.
1.
After confirming that the printer is not
performing any operation, open the front
cover.
Replacing the Waste Toner Bottle
Action
*1
pages.
75
Advertisement
Table of Contents
