Selected ﬁle/path is not correct
Meaning: When loading a KSF ﬁle that was split across mul-
tiple media, the order in which you attempted to
load the ﬁles was incorrect.
Load the KSF ﬁle in the correct order. To view the
ﬁle number order in which the KSF ﬁles were
saved, you can check the Utility "Translation."
(The sample name and number of the ﬁrst KSF ﬁle
will be displayed.)
Slice point over limit
Meaning: The Sampling mode "Time Slice" function or the
"Time Stretch" Slice function would divide the
sample into more samples than the maximum
(1000), so "Divide" cannot be executed.
Use "Link" to connect any "Index" that does not
need to be divided; then execute "Divide."
Source is empty
Meaning: No data exists in the pattern that you speciﬁed as
Specify a pattern that contains musical data.
Source sample is empty
Meaning: When executing Insert, Mix, or Paste, the source
sample is empty.
Execute the Copy operation before executing
Insert, Mix, or Paste.
There is no readable data
Meaning: Either the ﬁle size is 0 or the ﬁle does not contain
data that can be accessed by the load or open
operation. Alternatively, the data is damaged etc.,
and cannot be loaded or accessed.
Unable to create director y
Meaning: You attempted to create a directory that would
exceed the maximum pathname length (76 charac-
ters for the full pathname).
Unable to save ﬁle
Meaning: When executing the Media mode utility menu
command "Copy," the copy destination path
length exceeded 76 characters.
Meaning: When saving a ﬁle in Media mode, the save desti-
nation path exceeded 76 characters.
You can't undo last operation
Meaning: Once you enter event editing (even if you leave
You can't undo this operation
Meaning: When you exit recording or event editing in
Meaning: When editing in Sequencer mode, memory area
event editing without actually editing an event), it
will no longer be possible to execute a Compare of
the previous edit. If you wish to enter event edit-
ing, press the [F8] ("OK") key. To cancel, press the
[F7] ("Cancel") key.
Sequencer mode, the memory area for Undo
(Compare function) is not allocated. If you wish to
keep the data that was just recorded or edited,
press the [F8] ("OK") key. If you wish to return to
the previous data (i.e., to delete the data that was
just recorded or edited), press the [F7] ("Cancel")
for Undo (Compare function) cannot be allocated.
If you wish to execute the edit, press the [F8]
("OK") key. (It will not be possible to return to the
state before editing.) If you decide not to execute
the edit, press the [F7] ("Cancel") key.
In order to allocate memory area for Undo (Com-
pare function), delete unneeded data such as
songs, tracks, or patterns. We recommend that
you save data to media before you execute the
Are you sure ?
Are you sure ?