Table of Contents
Advertisement
HOME
Output Modes
Punch Mode
The Punch mode is available only when the PK-110/120 Punching kit or PZ-108 Punching/
Z-Folding unit option is installed on the FS-110/FS-210 finisher.
If both PK-110/120 Punching kit and PZ-108 Punching / Z-Folding unit are installed in the
machine, the PZ-108 Punching / Z-Folding unit is used.
When the Punch mode is selected in combination with any of the Primary (Main) tray
output modes, each printed sheet is punched and output to the Primary tray according to
the selected output mode.
❒ Print paper size: 11"x17", 8.5"x11" (20 lb paper recommended)
❒ Paper weight: 20 lb ~ 24 lb bond recommended
❒ Number of holes: 3 holes
❒ Hole diameter: 0.315" ± 0.020" (8 mm ± 0.5 mm)
❒ Hole pitch: 4.252" ± 0.020" (108 mm ± 0.5 mm)
Thin paper: 16 lb ~ 19 lb
Thick paper: 25 lb ~ 45 lb
4.252"
(108mm)
Output Modes 6-9
Advertisement
Table of Contents
