How To Access The Ecm Setting Mode - Konica Minolta Network Printer User Manual

HOME
Key Operator Mode
ECM (Electronic Copy Monitor) Function Setting [4] (continued)

How to Access the ECM Setting Mode

Key Operator Mode Screen
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen. (See note 1.)
If the Key Operator password is not valid, check with your service representative.
2 Touch [4] E.C.M. function setting . The ECM Master Key Code Screen displays if a code
is required.
3 Use the keypad on the touch screen to enter your 8-digit ECM master key code, then
touch OK to display the ECM Setting Menu Screen. (See note 2.)
4 Select the desired ECM function, and make settings as required.
To exit the ECM mode, touch RETURN on ECM Setting Menu Screen.
5 Touch RETURN on the Key Operator Mode Screen to return to the Basic Screen.
NOTES: 1 If an invalid password is entered, enter the valid 4-digit password.
2 If an invalid ECM master key code is entered, continue by entering the valid 8-digit code. The ECM
master key code can be set to less than 8 digits by the Memory switch setting of the Key Operator
function.
ECM Master Key Code Screen
ECM Setting Menu Screen
Key Operator Mode 9-11