System Initial Setting [1]; Date & Time Setting [1] - Konica Minolta Network Printer User Manual

HOME
Key Operator Mode

System Initial Setting [1]

Set the following initial conditions of the printer.
• Date & Time setting: Current date and time, Summer time, Time difference
• Language select setting: Language used in LCD (English)
• IP address setting: IP address for Web Utilities access
Date & Time Setting [1]
Set the current date and time, the summer time, and also the time difference.
❒ Default setting: Summer time off
System Initial Setting Menu Screen
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen.
NOTE: If an invalid password is entered, enter the valid 4-digit password.
2 Touch [1] System initial setting to display the System Initial Setting Menu Screen, then
touch [1] Date & Time setting to display the Date & Time Setting Screen.
3 Adjust the time.
The time indicated by the printer is displayed in the upper line and ordered by date,
month, year, and time (in 24-hour expression). In the lower line, the highlighted section
can be changed by using the keypad on the screen.
Touch SET to move the highlighted section to the number to be changed.
4 To activate the summer time (Daylight Savings Time) function, touch Summer time to
highlight it. The Present time will gain an hour.
9-6 Key Operator Mode
Date & Time Setting Screen
Difference in Time Setting Screen