Control Panel Adjustment [10] - Konica Minolta Network Printer User Manual

HOME
Key Operator Mode

Control Panel Adjustment [10]

Use this feature to check the LCD touch screen and realign the position of touch sensors
that may have shifted.
Key Operator Mode Screen
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen. (See note.)
2 Touch [10] Control panel adjustment to display the Control Panel Adjustment Screen.
3 Touch the "+" symbol at the upper right corner, then lower left corner on the screen. The
present coordinates will be displayed in the message area of the screen.
4 Check that the X coordinate and Y coordinate displayed in the first line of the message
area fall within the standard value displayed in the second line.
5 Touch the CHECK BUTTON s at the upper left and lower right corners on the screen to
check if the buzzer tone functions normally.
6 If the coordinates fall out of the range of the standard value in step 4, or the buzzer tone
does not sound in step 5, repeat the adjustment procedure from 3 to 5 or contact your
service representative.
7 Press [1] of the control panel keypad to restore the Key Operator Mode Screen.
8 Touch RETURN to return to the Basic Screen and perform printing operations.
NOTE: If an invalid password is entered, enter the valid 4-digit password.
Control Panel Adjustment Screen
Key Operator Mode 9-31