Table of Contents
Advertisement
HOME
Key Operator Mode
ECM (Electronic Copy Monitor) Function Setting [4] (continued)
E.C.M. All Count Reset [2]
Reset the count for all ECM accounts.
ECM Setting Menu Screen
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen. (See note 1.)
2 Touch [4] E.C.M. function setting . The ECM Master Key Code Screen displays, if a code
is required.
3 Enter your 8-digit ECM master key code, then touch OK to display the ECM Setting
Menu Screen. (See note 2.)
4 Touch [2] E.C.M. all count reset . The ECM All Count Reset Screen will be displayed.
5 Touch YES to reset all counters to zero and to return to the ECM Setting Menu Screen or
touch NO to cancel.
Touching RETURN will also cancel this function and return to the ECM Setting Menu
Screen.
6 If other ECM setting changes are required, touch the desired key, from [1]~[3].
7 Touch RETURN to restore the Key Operator Mode Screen.
8 Touch RETURN to return to the Basic Screen and perform printing operations.
NOTES: 1 If an invalid password is entered, enter the valid 4-digit password.
2 If an invalid ECM master key code is entered, continue by entering the valid 8-digit code.
9-16 Key Operator Mode
ECM All Count Reset Screen
Advertisement
Table of Contents
