Table of Contents
Advertisement
HOME
Safety Information
Finisher Capacity Requirements
CAUTION:
FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/OR
MACHINE DAMAGE.
❒ FINISHER PAPER CAPACITY
To prevent paper misfeed, do not exceed the paper capacity of the Finisher.
FS-110/FS-210 Finisher paper weight: 16 lb ~ 24 lb
When the selected print quantity exceeds the maximum paper capacity, remove the
printed sheets from the finisher while the paper is exiting.
Paper capacities below are stated for 20 lb bond unless otherwise indicated.
This Finisher also accepts wide types of the regular sizes stated below.
Finisher FS-110/FS-210
Primary (Main) tray: Non-sort/Sort/Group mode
500 sheets (5.5"x8.5"R)
3,000 sheets (8.5"x11", 8.5"x11"R)(FS-110)
2,500 sheets (8.5"x11", 8.5"x11"R)(FS-210)
1,500 sheets (11"x17", 8.5"x14")
Primary (Main) tray: Punch mode (machine with PK-110/120 only)
3,000 sheets (8.5"x11")
1,500 sheets (11"x17")
Primary (Main) tray: Staple-Sort / Staple-Sort + Z-Folding mode
* The maximum capacity varies according to the number of prints to be stapled.
See p. 4-5.
When using Z-Folding mode with Staple-Sort mode, the maximum capacity
varies according to the number of Z-folded sheet in one stapled set. See p. 4-8.
Secondary (Sub) tray: Non-sort mode
200 sheets max.
2-10 Safety Information
The Secondary (sub) tray can be unloaded while the Force 65 is running.
Set production is not limited by the capacity of the Secondary (sub) tray.
The Secondary (sub) tray can be unloaded while the Force 65 is running.
Set production is not limited by the capacity of the Secondary (sub) tray.
1,000 sheets* (11"x17" ~ 8.5"x11"/R)
Advertisement
Table of Contents
