Selecting The Paper; Manual Paper Selection; Selecting Manually Fed Paper; Manually Selecting The Paper Size - Konica Minolta Di1610 User Manual

4
4.2

Selecting the Paper

Before making a copy, the tray containing the paper to be used must be selected.
Either a paper tray can be selected or paper can be loaded into the Bypass Tray.

Manual Paper Selection

The tray containing the paper you want to use can be manually selected.
Note
The optional Paper Feed Cassette is required.

Selecting Manually Fed Paper

When the desired paper is loaded into the Bypass Tray and the paper size and type
are specified, paper loaded into the Bypass Tray is given priority during feeding.

Manually Selecting the Paper Size

1
Position the original.
❍
"Loading Originals" on page 3-22
2
Press the [Paper] key until the tray
loaded with the desired paper is
selected.
Note
If paper is loaded into the
Bypass Tray, first remove it.
If Tray1 is selected, the paper
size and paper type must first
be specified. For details, refer
to "Selecting the "PAPER
SOURCE SETUP" Menu" on
page 5-12.
3
Make the other necessary settings.
❍
"Specifying the Zoom Ratio" on page 4-10
❍
"Adjusting the Image Density" on page 4-12
4
Using the 10-Key Pad, enter the number of copies to be made, and then press
the [Start] key.
This will start the copy cycle.
4-4
4.2 Selecting the Paper
Di1610/Di1610p