5.2 Specifying the Machine Settings
LAMP OFF TIME
Selecting the "MACHINE SETTING" Menu
Press the [Utility] key.
"MACHINE SETTING" appears.
From the 10-Key Pad, press the key ( to ) for the MACHINE SETTING
function that you wish to set.
The MACHINE SETTING functions are as follows:
1 AUTO PANEL RESET
2 ENERGY SAVE MODE
3 DENSITY (ADF)
4 DENSITY (BOOK)
5 PRINT DENSITY
6 LCD CONTRAST
8 LAMP OFF TIME
To quit changing the machine settings, press the [No] key. "STOP
SETTING?" appears. Press the [Yes] key to quit changing the settings.
The time until the exposure lamp goes off can be adjusted.
Mode 1: When four hours have passed since the last operation was
Mode 2: When the machine enters Energy Save mode
• The factory default setting is "Mode 1".