Konica Minolta Di1610 User Manual page 69

4
8
Press the [Yes] key.
9
Using the 10-Key Pad, enter the
length (Y) of the paper.
Note
The length can range from
140 mm (5-1/2) to 356 mm
(14).
Tip
Enter the value by mm using
the 10-key Pad. Refer to the
conversion rate below.
1 inch = 25.4 mm
10
Press the [Yes] key.
11
Make the other necessary settings.
❍
"Specifying the Zoom Ratio" on page 4-10
❍
"Adjusting the Image Density" on page 4-12
12
Using the 10-Key Pad, enter the
number of copies to be made, and
then press the [Start] key.
Tip
To change the number of
copies to be made, remove the
paper from the Bypass Tray and then reload it. Repeat steps 11 and 12.
4-8
4.2 Selecting the Paper
Yes
140-356
Yes
Di1610/Di1610p