Settings On The Programming Mode; Setting Features - Panasonic KX-NS700 User Manual

3.1.2 Settings on the Programming Mode

3.1.2 Settings on the Programming Mode
You can programme features using the programming mode for a PT or PS.
–

Setting Features

–
Clearing Features
•
To exit at any time, lift the handset.
•
To enter the programming mode when using a PS, refer to the documentation for your PS.
•
For KX-UT series SIP phone users: You cannot programme the following features using a
KX-UT series SIP phone. These features are programmed via Web Maintenance Console.
For more information, consult your System Administrator.
Setting Features
The default settings are shown in bold letters. For later reference, place a check mark in the boxes below to
indicate your customised setting.
Notice
The default value may vary depending on country/area.
To enter the programming mode
PROG.
OR
PAUSE
Press PROGRAM
or PAUSE.
Item
Your extension information
Display Contrast Selection
Preferred display contrast
level from the 4 levels
available
308 User Manual
programming
input
Follow
Press ENTER
or STORE.
programming
input.
Programming
Input
0 0
*1
0 1
To programme
selection &
OR
parameter
Follow Selection
& Parameter.
Selection & Parameter
The display shows your PT or PS's extension number.
<Example>
Ext 101
1
2
3
4
To exit
PROG.
OR
OR
PAUSE
Press ENTER Press PROGRAM
or PAUSE.
or STORE.
Light
Little Light
Little Dark
Dark