To Send An External Delivery Message - Panasonic KX-NS700 User Manual

1.8.4 Sending Messages

To send an external delivery message

PT/SLT/PS/SIP Extn.
Log in to your mailbox.
To specify a single recipient
1
Enter 1.
2
Enter 2
to accept.
1
Enter 1
to end recording.
Continued on next page
•
* If you are using an ISDN or SIP line in en bloc dialling mode, to insert a pause or special
command in the middle of the telephone number, pause momentarily while entering the
telephone number. You will hear a list of available options, for example, "To add more digits,
press 4. To insert a pause, press 5.".
164 User Manual
9 3 1
Enter 931.
outside line access no.
Enter the outside line access number
needed for making outside calls.
To specify an extension instead of
an outside telephone number,
enter the extension number,
then skip the next step.
4-digit password
Enter a 4-digit password
required for listening to the message.
Press # if you do not want
to set a password.
#
Enter # for immediate delivery.
To set message delivery time,
go to "To set message delivery time".
Go to "To specify a single recipient"
or "To specify multiple recipients
(external message delivery list)".
Outside party's
telephone no.
Dial the outside party's telephone number
(including area code if needed).
C.Tone
State the recipient's name.
Go to
"To record your message".
*