3.1.2 Settings on the Programming Mode
3.1.2 Settings on the Programming Mode
You can programme features using the programming mode.
–
Setting Features
–
Clearing Features
•
To exit at any time, lift the handset.
•
To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
Setting Features
The default settings are shown in bold letters. For later reference, place a check mark in the boxes below to
indicate your customised setting.
Notice
The default value may vary depending on country/area.
To enter the programming mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
Item
Your extension information
212
User Manual
programming
input
Follow
Press ENTER
programming
or STORE.
input.
Programming
Input
*1
0
0
To programme
selection &
OR
parameter
AUTO DIAL
STORE
Follow Selection
& Parameter.
Selection & Parameter
PT: The display shows the PBX or shelf number, slot
number and port number.
<example for users of KX-NCP500/KX-NCP1000/
KX-TDE100/KX-TDE200>
EXT1050:10308
PBX no.
<example for users of KX-TDE600>
EXT2100:20101
Shelf no.
(1
4)
–
PS: The display shows the PS number.
<example>
EXT3001:99001
To exit
PROGRAM
OR
OR
AUTO DIAL
PAUSE
STORE
Press PROGRAM
Press ENTER
or PAUSE.
or STORE.
Port no.
Slot no.
Port no.
Slot no.
PS no.