Settings On The Programming Mode - Panasonic KX-TDA30 User Manual

3.1 Customising Your Phone (Personal Programming)
3.1.2

Settings on the Programming Mode

You can programme features using the programming mode.
– Setting Features
– Clearing Features
• To exit at any time, lift the handset.
• To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
Setting Features
The default settings are shown in bold letters. For later reference, place a check mark in the boxes below to
indicate your customised setting.
Notice
The default value may vary depending on country/area.
To enter the programming mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
Item
Your extension information
188 User Manual
To programme
programming
OR
input
AUTO DIAL
STORE
Follow
Press ENTER
programming
or STORE.
input.
Programming
Input
0 0
selection &
parameter
Follow Selection
Press ENTER
& Parameter. or STORE.
Selection & Parameter
PT: The display shows the PBX or shelf number, slot
number and port number.
<example for users of KX-TDA30/KX-TDA100/KX-
TDA200>
EXT1050:10308
PBX no.
Slot no.
<example for users of KX-TDA600>
EXT2100:20101
Shelf no.
Slot no.
(1 4)
–
PS: The display shows the PS number.
<example>
EXT3001:99001
To exit
PROGRAM
OR
OR
AUTO DIAL
PAUSE
STORE
Press PROGRAM
or PAUSE.
Port no.
Port no.
PS no.