Ip Data; Ip Re-Mapping - Novra S300 User Manual

4.2 IP Data

4.2.1 IP Re-Mapping

This section discusses how to configure the IP Re-Mapping feature within the S300.
The IP Remapping feature in the S300 will enable the operator to re-map a multicast IP addresses or multiple
multicast IP addresses that have been received by the receiver to a different destination multicast IP address.
The IP mapping table will support up to 16 entries and will therefore allow for 16 multicast addresses to be
remapped. Some of the features of the IP mapping table include:

Ability to map single multicast IP address to a destination multicast IP address

Ability to map multiple multicast IP addresses to a single destination multicast IP address,

Ability to use a subnet mask to map a range of multicast IP address to a single destination multicast
IP,

Ability to turn the multicast mapping table on or off without losing the table contents,

Ability to turn a single multicast mapping table entry off (No Rule) without losing the entry from the
table,

Ability to use IGMP filtering to enable (or disable) sending of mapped multicast packets, and

Ability to forward mapped multicast IP packets regardless IGMP filter setting
The IP mapping table can only be assessed from the main screen by selecting the IP Remap button.
This will bring up the IP re-mapping table as shown below.
Version: 2.02
Confidential and Proprietary 23 of 50