Novra S300 User Manual page 44

6) I have created a mapping rule, but the packets don't seem to be mapped. I don't see either the
Original IP packets or the New IP packets when I sniff the LAN.
Make sure your mapping action rule is Normal or Forward,
-
If your mapping action is Normal and you have IGMP filtering enabled, make sure you have an
-
application running that will generate an IGMP join to receive the packets. Otherwise you could try to
turn IGMP filtering off, or set your mapping action rule to Forward. Note: if you set your mapping
action rule to No Rule, the Original IP packets will not get mapped and the IP traffic on your LAN will
be your Original IP packets.
Version: 2.02
Confidential and Proprietary 44 of 50