Mpe Pid Selection - Novra S300 User Manual

4.3.1.3

MPE PID Selection

The MPE PID Selection tab allows the user to configure the S300 to receive MPE data PID's. To add an
MPE data PID, the user enters the PID into the PID text box and selects Add PID. Similarly, to remove an
MPE PID, the user selects the program and clicks Remove PID.
The Show All. checkbox at the bottom of the Programs Selected pane can be used to show just the
configured MPE PID entries or to show all the configured entries.
The entry of these MPE PID's (4133 and 4097) in the Program list does not show any color highlighting
because the receiver does not have any information regarding the assignment of these PID's to a program.
Figure 13 - MPE PID Selection Screen
Confidential and Proprietary 33 of 50
Version: 2.02