Getting Started; Typical S300 Installation - Novra S300 User Manual

3 Getting Started

3.1 Typical S300 Installation

Received R/F
Signal
Satellite Dish
and LNB
-
NOTE: This information is needed in order for the receiver to function. It is recommended
that all the information be collected before attempting to install the service. Novra
Technologies Inc. expects that end users, who wish to control the LNB with the receiver,
already have good understanding of satellite technology.
CAUTION: Nothing should be inserted between the S300 and the satellite dish except for a
surge suppressor. Cable TV Splitters, TVs, VCRs, and FM receivers are not designed for
connection to this portion of the network. It is very likely they will be damaged by the LNB DC
voltage generated by the S300
Version: 2.02
S300S2VCA directly
controls/powers the
LNB
Received I/F
Signal
Ethernet
Packets to/from
Mgmt Station
Figure 1: Typical Configuration
Confidential and Proprietary
CAM Slot
(Optional)
(Cat 5
Installation
Crossover
Disk
Cable)
Power
Supply
24 Vdc
(Center +ve)
The S300
Receiver
Package
7 of 50