Novra S300 User Manual page 19

Figure 7: Satellite Configuration and LNB Parameters Dialog
1) RF Frequency: The RF Frequency of the signal that you are trying to receive.
2) Symbol Rate: This is the symbol rate of the transponder that you are trying to tune to. The S300
supports automatic detection of the incoming symbol rate (check box) or you can manually specify
which symbol rate you wish the receiver to tune to.
3) Gold Code: Enter the Gold Code setting here. This must match the Gold Code setting in the
modulator that is used to generate the DVB-S2 stream. For DVB-S operation, the Gold Code box
will be grayed out.
NOTE:
then the contents of the Gold Code box will be ignored by the receiver.
Version: 2.02
If the Search Mode is set to Both and the received stream is DVB-S,
-
Confidential and Proprietary 19 of 50