Control; Reboot Button; File Drop Down - Novra S300 User Manual

4.4 Control

The Control button group provides general configuration and control elements for the receiver.

4.4.1 Reboot Button

Selecting this button will reboot the S300.

4.5 File Drop Down

The file drop down menu (shown below) provides access to the following features
1. Save Configuration: Allows the user to save the S300 configuration settings to an XML file
2. Load Configuration (without network settings): Allows the user to load the S300 configuration
settings from an XML file. The network settings of the receiver will not be updated using this
command.
3. Load Configuration (with network settings): Allows the user to load the S300 configuration settings
from an XML file. Using this command, the S300 network settings (including the IP address) will be
updated an applied to the S300.
CAUTION: Setting the IP address of the S300 to a non-routable address or an address
not on the same subnet as the S300 Console PC may make the S300 unreachable from
the S300 Console PC.
4. Change Password: Allows the user to change the S300 Console program password.
Version: 2.02
Figure 15 - File Drop-Down Menu
Confidential and Proprietary 36 of 50