S300 Startup - Novra S300 User Manual

3.4 S300 Startup

1- Start the S300 Console software.
NOTE:
network settings function to work properly.
2- The software will attempt to auto-detect all the receivers currently connected to the LAN. After the
auto detection is complete, a screen showing all discovered devices will be displayed as shown
below:
You can now select the device you wish to configure by double clicking on the receiver model type in
the Devices Discovered listing.
Version: 2.02
-
You MUST be logged onto the system as Administrator, for the
Figure 2 - Discover Devices
Confidential and Proprietary 10 of 50