Ip Data; Content Button - Novra S300N User Manual

4.2 IP Data

The IP Data group of buttons enables the operator to configure the reception and transmission of MPE IP
data. This group includes two buttons: the IP Data Content button and the IP Remap button. Both are
described in detail below.

4.2.1 Content Button

The IP Data Content button screen (shown below) is used when the S300 is to be configured to receive
MPE or IP data from the satellite stream and forward this data to the appropriate IP address on the LAN. This
screen is used to add (or delete) the data Program IDs (PIDs) that enable the S300 to receive the IP content.
1. PID: Use this edit box to add a new Program ID to the list; you can use decimal input or
hexadecimal values preceded by "0x".
2. ADD: This button adds the content of the PID box to the PID List.
3. Delete: This button deletes the selected PID from the PID list.
4. Delete All: This button will empty the PID list.
Version: 1.2
Figure 8: IP Data Content PID's
Confidential and Proprietary 24 of 40