Software Installation On Windows 2000, Or Xp; A75 Startup And Main Screen - Novra A75 ATSC User Manual

Atsc receiver

Hide thumbs Also See for A75 ATSC:

Table of Contents

3.3 SOFTWARE Installation on Windows 2000, or XP

The A75 Console software is supplied as a single executable. Therefore, it is easy to install on

different systems. All you need to do is copy the executable to your working directory.

NOTE:

"16 bit color" to function properly.

1- Start the A75 Console software. Once running you will be presented with the A75 Console main

screen as shown in Figure 2 below.

NOTE:

network settings function to work properly.

2- Before starting to configure your A75, you must ensure the network settings of the device make it

accessible from the Windows management PC. The IP address of the device and the IP address of

the management station must reside on the same subnet, or there must be a route that connects both

of them through a router. For the simple case where the A75 and the management PC are

connected via an Ethernet crossover cable or through an Ethernet hub, there are two different ways

this may be accomplished. The A75 Console will automatically detect all A75's that are presently

connected to the management PC LAN. Clicking on the Device List Icon (item [3] in Figure 2

below), will present the list of connected A75's. This list will identify the A75(s) by MAC, IP address

and A75 type. Click on the one you wish to configure, and the status box of the Console main screen

will be updated with the A75 information.

You must now ensure that your A75 IP address and your Management PC IP address are on the

same subnet. As mentioned, this can be done in one of the two ways:

1. In the console status box, the IP address of your A75 will be displayed. Note the A75 IP

address and change the IP address of your management PC Network Interface Card (NIC)

(the one that's connected to the A75) to be on the same subnet as the A75. The PC NIC IP

address may be changed using My Network Places in Windows. If unsure, please refer to

your Windows user manual to perform this operation, OR

2. Even though your A75 and your management PC are not on the same subnet, the A75

console has been designed to be able to change the network settings of the A75. Therefore,

in the A75 Console, click Configure and then Network. This will bring up the A75 network

Version: 1.02

You MUST be logged onto the system as Administrator.

Your screen resolution MUST be at least 800 x 600 and at least

You MUST be logged onto the system as Administrator, for the

Confidential and Proprietary

9 of 32

Table of Contents