Short Messages (Sms); Configuring The Telephone Connection - TIPTEL 570 SD Manual

Short messages (SMS)

Short messages (SMS)
The SMS service allows you to send or receive SMS messages to other terminals.
The messages are not transferred directly to the other terminal but instead are sent
to your network operator's message centre. The message can contain up to 160
characters. You can save up to 20 messages in the inbox. To use the SMS it is
essential that there is support for transferring the call number (CLIP). Then all you
have to do is register with your message centre and away you go.
You can also send your short message to a subscriber that does not have an SMS-
enabled device. The short message is then read out loud as a voice message.
Please refer to your network operator's information material for this and other
functions.
Please observe the following points so that you can send and receive short
messages (SMS) with your tiptel 570 SD:

Configuring the telephone connection

Analogue telephone connection
If you have an analogue telephone connection, please check whether you can
access the "Call number transfer" and "Call number display" (CLIP, incoming and
outgoing) functions. To do so, please ask your network operator if these features
are available for your connection.
ISDN connection
If you have an ISDN connection check that call number display (CLIP), is activated
and that call number transfer (CLIR) is not suppressed in your PABX.
50