Sample Programming For Timer - TIPTEL 570 SD Manual

Use the two lower selection buttons
and the control buttons (left/right)
to find what needs to be changed in
the selected time.
Make the desired settings using the
control buttons (up or down).
To delete a switching time press the
selection button next to the delete
symbol.
2s To delete the timer press the
selection button next to the delete
symbol for 2 seconds.
To stop entering additional
switching times press stop.
To stop the entry press stop several
times.

Sample programming for timer

You want your tiptel 570 SD to switch on OGM 1 on Mondays to Fridays at 17.00
and switch off at 08.00. When the office closes on Friday and over the weekend the
answering machine should use OGM 2 throughout. This requires 3 switching times.
Timer
The symbols have the following

meanings:

= Answering mode

= OGM

= Message transfer
= Call forwarding
A dash means that the previous status is
continued.
The empty entry field is displayed again.
All switching times are deleted.
The settings are confirmed.
The initial state is again displayed.
62