Getting Started; Parts Supplied; Installation; Connecting - TIPTEL 570 SD Manual

Getting started

Parts supplied

Your tiptel 570 SD package contains:

tiptel 570 SD

Telephone connection cable
 Mains plug 11.5V / 350 mA / 50 Hz

USB cable for connecting to a PC

Headset

CD-ROM with drivers and application software

2 transfer cables pin/pin and pin/cinch

Operating instructions

Memory card

Installation

Your tiptel 570 SD has been produced for normal operating conditions. Solutions in
furniture varnish, cleaning oils or paint cleaners can loosen the base. Bases that
have been altered in this way may leave tracks behind on the furniture.
Therefore use a non-slip underlay especially for new or freshly treated furniture.

Connecting

Before you can use your tiptel 570 SD you first need to connect all the necessary
cables.
1 Fit the small connector of the mains plug into the "POWER" jack and the plug
into a 230 V socket outlet.
2 Fit the small connector of the telephone connection cable into the "LINE" jack
and the phone plug into the telephone socket (Socket for auxiliary device). ).
3 Insert memory card to dead stop into corresponding slot (see picture).
4 If you want to transfer incoming messages to an external medium fit the
transfer cable with the jack plug to the "OUT" socket and the cinch plug to the
audio input on the external device (audio system, cassette recorder etc.). You
may also connect PC loudspeakers (active speakers) to the "OUT" connector.
Getting started
13