Toll Restriction Override - Samsung NX-828 Technical Manual

FEATURES
NX-828
HYBRID KEY SYSTEM

Toll Restriction Override

There are several methods of toll restriction override as described below.
System Speed Dial Toll Restriction Override
Program options allow for system speed dial numbers to follow or bypass a station's toll
restriction class.
See: MMC 66 System Speed Dial Toll Restriction
Authorization Code
Authorisation codes are used to validate a station user and give permission to make a call. Each
authorisation code has an associated toll class. When the code is entered, the station toll class
is changed to that of the authorisation code.
See: MMC 63 Authorization Code
Walking Class of Service
You can change a restricted station's toll class to the same class as your station by entering the
walking class of service (COS) ID, the station number and the station's passcode. The default
station passcode 1234 cannot be used.
See: MMC 70 Dial Numbering Plan (Default Code for COS: 59)
Urgent Code
The system provides a maximum of five urgent codes. These codes can be accessed by any
class of service and are useful for allowing access to emergency numbers.
See: MMC 64 Override Table
Tone Or Pulse Dialling
Outside lines can be programmed for either tone or pulse dialling to meet local telephone
company requirements.
See: MMC 41 Trunk Dialling Type
Traffic Report Printout
The traffic report prints system-wide totals for incoming calls, outgoing calls and intercom calls.
This report also shows the number of outside calls made and answered, as well as the number of
intercom calls made and answered for each station. This report can be set for automatic printout
at the end of each day or at the end of every week. The report can also be printed on demand.
A customer-provided printer must be connected to the SMDR port or R-MMC port to print this
report.
See: MMC 80 I/O Parameter
MMC 83 Call Traffic Report
3 - 15