Private Lines; Ring Over Page - Samsung NX-828 Technical Manual

NX-828
HYBRID KEY SYSTEM

Private Lines

For private line use, stations can be prevented from dialling and/or answering any line.
See: MMC 31 Ext/Trk use
Programmable Line Privacy
Each outside line can be programmed to ignore the automatic line privacy. This allows up to four
other parties to join a conversation by simply pressing the line button. This is similar to 1A2 key
telephone operation.
See: MMC 42 Trunk On/Off
Programmable Timers
There are a number of programmable system timers to allow each installation to be customised to
best fit the user's application.
See: MMC 50 System Timers
Recalls
Calls put on hold, transferred or camped-on to any station will recall to the originating station if
not answered within a programmable period of time. A recall that goes unanswered for the same
period of time will recall to the system operator group. Hold and transfer recalls each have their
own individual programmable timer.
See: MMC 50 System Timers
Remote Programming (option)
NX-828's remote programming allows the technician to access the system database from a remote
location to make programming changes. A traffic report can be remotely requested for use as a
troubleshooting aid. A customer-provided modem and PC can also be connected directly to the
RS-232C DB9 connector on the optional SMDR/R-MMC card for on-site programming.
See: MMC 80 I/O Parameter

Ring Over Page

A system-generated ring tone can be programmed on a per-line basis to go out over a customer-
provided external paging system when the system is in night mode.
See: MMC 42 Trunk On/Off
(1A2 EMULATION)
(Default for RING OVER PAGE: OFF)
3 - 12
FEATURES