Samsung NX-828 Technical Manual page 145

NX-828
HYBRID KEY SYSTEM
MMC 71
Description:
Allows for the customising of programmable keys on a system-wide basis.
Action
1. Press AUTO RDL and dial 71
2. Press LINE1 or LINE2 to select the type of the
keyset:
3. Press the desired key
OR
Press RDL or CONF to select desired
key. (e.g. 13)
4. Enter the key programming via keypad.
Trunk number, Trunk Group number, Station
number, Station Group number, or feature number
can be programmed keys
If you want to program a feature key, you must
press '*' key
Before entering the feature key ID (e.g. NIT : *26)
Programmable key assignments are listed below
(Default Data)
If you want to change another key, return to step 3
5. Press AUTO RDL to save and exit.
D EFA U LT D A TA
NX- 24E/NX- 24B
19: 209 20:210
13: 203 14: 204
07: 705 08: 706
01: 701 02: 702
NX- 6B
01: 701 02: 702
SYSTEM KEY PROGRAMMING
21: 211 22: 212
15: 205 16: 206
09: 707 10: 208
03: 703 04: 704
03: 703 04: 704
Display
TYPE: NX24
TYPE: NX12
13:NONE
13:*26
23: 213 24: 214
17: 207 18: 208
11: 201 12: 202
05: FLS 06: TRN
05: FLS 06: TRN
PROGRAMMING