Toll Restriction Override; Voice Mail Integration - Samsung DS 616 User Manual

TOLL RESTRICTION OVERRIDE

Program options allow system speed dial numbers to follow or bypass a station's
toll restriction class. In addition, users may make calls from a toll restricted station
by using the walking class of service or authorization code feature.
TONE OR PULSE DIALING
Outside lines can be programmed for either tone or pulse dialing to meet local
telephone company requirements.
TRANSFER
System operation permits station users to transfer calls to other stations in the sys-
tem. Transfers can be screened, unscreened or camped-on to a busy station.
TRUNK GROUPS (3)
Outside lines can be grouped for easy access by dialing a code or pressing a
button. There are 3 trunk groups available. Access codes are 9 and 80–82.
UNIVERSAL ANSWER
Station users may dial the Universal Answer code or press the UA key to answer
any outside lines programmed to ring the UA device. The UA device can be a
station, group of stations, common bell or ring over page.
UNLISTED SPEED DIAL NUMBERS
System speed dial numbers 90–99 and each station user's personal speed dial
numbers 1 and 2 will not be displayed when used. This will ensure the privacy of
these telephone numbers and prevent unauthorized use. However, they will be
printed out on the SMDR report.

VOICE MAIL INTEGRATION

The DS 616 system uses DTMF tones (inband signaling) to communicate with any
compatible voice mail system. Stations can call forward to a voice mail system.
When answered, the system will send DTMF tones routing the caller directly to the
called station user's mailbox. Keyset users can press one button to retrieve mes-
sages from the voice mail system. A Voice Mail Transfer key permits keyset users
to easily transfer a caller directly to an individual voicemail box without navigating
through menus.
WALKING CLASS OF SERVICE
This feature allows users to make calls or use features from a station that is re-
stricted. The users may either use the WCOS feature code or the authorization code
feature. Both methods change the class of service to correspond with the station
passcode or authorization code that is dialed. After the call is completed, the sta-
tion returns to its programmed class of service.
4.17