Motion Control Lever - Kubota ZG222A-AU Operator's Manual

12 OPERATING THE ENGINE
3. Make sure that the PTO lever is in the
"DISENGAGED" (OFF) position.
(1) PTO lever
4. Place the motion control levers in the
"NEUTRAL LOCK" position.
(1) Motion control lever (LH)
(2) Motion control lever (RH)
"ENGAGED" (ON)
"DISENGAGED" (OFF)
(A) "NEUTRAL LOCK"
Position
(B) "NEUTRAL" Position
(held by hands)
(C) "CREEP" Position
(hands off)
(D) "FORWARD"
(E) "REVERSE"
5. Release the hydraulic lift control pedal
to the "DOWN" position.
(1) Hydraulic lift control pedal
6. Set the throttle lever as follows.
A If the engine is cold:
Pull the choke knob out.
A If the engine is warm:
Place the throttle control lever midway between the
"SLOW" and the "FAST" positions.
(1) Throttle lever
(2) Choke knob
(A) Pull out: "ON" position
(B) Push in: "OFF" position
Depressing: "UP"
Release: "DOWN"
"FAST"
"SLOW"