Motion Control Lever - Kubota ZD1011-AU Operator's Manual

12 OPERATING THE ENGINE
3. Make sure that the PTO lever is in the
"DISENGAGED" (OFF) position.
(1) PTO lever
4. Place the motion control levers in the
"NEUTRAL LOCK" position.
(1) Motion control lever (LH)
(2) Motion control lever (RH)
"ENGAGED" (ON)
"DISENGAGED" (OFF)
(A) "NEUTRAL LOCK"
Position
(B) "NEUTRAL" Position
(held by hands)
(C) "FORWARD"
(D) "REVERSE"
5. Release the hydraulic lift control pedal
to the "DOWN" position.
(1) Hydraulic lift control pedal
6. Set the throttle lever 1/2 way forward.
(1) Throttle lever
7. Insert the key into the key switch and
turn clockwise one notch.
Make sure the Easy Checker (TM) lights
are ON.
A Do not depress the hydraulic lift control pedal.
When the engine is off, depressing the hydraulic lift
control pedal (UP or DOWN) will lower the implement.
"DOWN": Release the pedal
"UP": Keep depressing the
pedal
"FAST"
"SLOW"