How To Raise The Operator's Seat - Kubota ZG222A-AU Operator's Manual

40 PERIODIC SERVICE

HOW TO RAISE THE OPERATOR'S SEAT

C Raise
To avoid personal injury:
A Fully raise the operator's seat.
(To the locked position)
Do not keep the seat halfway.
1. Seat must be all the way back before raising.
2. Pull the latch lever on the seat panel rearward.
(1) Latch lever (A) "PULL"
3. Raise the operator's seat to the "LOCK" position.
(1) Operator's seat
(2) Seat support rod
C Lower
To avoid personal injury:
A Do not drop the seat to close it.
A Watch your hands. Do not place your hands
under the seat, when closing.
1. Pull up the seat support rod and release the "LOCK".
2. Lower the seat slowly to lock.
3. Slide the seat to proper position.