Starting; Operator's Seat; Operator's Seat; Seat Belt - Kubota ZG222A-AU Operator's Manual

STARTING

1. Adjust the operator's position and
engage the seat belt.
BOperator's Seat
To avoid personal injury:
A Make adjustments to the seat only while the
machine is stopped.
A Make sure that the seat is completely secured
after each adjustment.
A Do not allow any person other than the driver to
ride on the machine.
(1) Armrest
(2) Fore-aft adjusting handle
C How to adjust the operator's seat
A Fore-aft adjust
Pull the seat adjusting lever and slide the seat.
A After adjusting the operator's seat, be sure to check to
see that the seat is securely locked.
BSeat Belt
To avoid personal injury:
A Always use the seat belt when the ROPS is
installed.
A Do not use the seat belt if a foldable ROPS is
down or there is no ROPS.
Adjust the seat belt for proper fit and connect to the
buckle. The seat belt is auto-locking retractable type.
OPERATING THE MACHINE

(1) Seat belt

2. Raise the implement.
BHydraulic Lift Control Pedal
The hydraulic lift control pedal is used to raise the mower.
To raise the mower, keep depressing the pedal.
To lower it, release the pedal.

(1) Hydraulic lift control pedal

A Do not operate until the engine is warmed up. If
operation is attempted when the engine is still cold, the
hydraulic system may be damaged.
A Do not operate at slow engine rpm. Move the throttle
lever above 1/2.
A If noises are heard when implement is lifting after the
hydraulic lift control pedal has been activated, the
hydraulic mechanism is not adjusted properly. Contact
your local KUBOTA Dealer for adjustment.
A Do not depress the hydraulic lift control pedal
continuously while operating the machine.
21
"DOWN": Release the pedal
"UP": Keep depressing the
pedal