Volume & Squelch Setting - Yaesu FT-51R Owner's Manual

Dual receive is active only when a sub chan-
nel is displayed; the
band or bands appear in the main and sub chan-
nel displays. Transmission is only possible on
the main channel, but both receivers can be set to
frequencies in the same band in any combination
preset volume and squelch levels and
U H F
ory display, and bargraph meter for signal
strength and power output (S/PO) indication.
Normally, the
DIAL
functions only affect the main channel. How-
@
first so that ) blinks next to
ever, by pressing
the sub channel, the controls now acts on the sub
channel instead. After making adjustments to
the sub channel, press
to the main channel.
Volume Setting
press @or to adjust receiver volume for that
band. While setting the volume,
played followed by a
bargraph to provide a visual reference of the
selected level.
button selects which
selector knob and keypad
again to return control
is dis-
Zone
segment on the LCD
ID
Main-Channel (active)
VOL level
Each press of the button adjusts the volume
level one increment, and two increments move
the bargraph segment one place. If there is no
you
signal, can temporarily override the squelch
by holding the center
switch, while adjusting the volume on
PTT
background noise.
Squelch Setting
Squelch silences background noise when no
signal is present on the channel. You adjust the
receiver squelch for each bagcILin a similar man-
ner as the volume using the
first pressing
(within 3 seconds).
Main Channel (active)
SQL level
i
Sub-channel VOL level
button (below the
@/"&
buttons,
Sub-channel
SQL
level