Yaesu FT-51R Owner's Manual page 51

Trigger Paging
This feature is designed to overcome the in-
convenience of having to manually switch to
and from Code Squelch mode when responding
to a page. It can only be used between transceiv-
ers equipped with this feature: such as the Yaesu
To activate Trigger Paging, press
edly until T.PAGEis displayed. When a call is
received, blinks, and the alert ringer
sounds. If the other station is also using Trigger
Paging, communications can begin just by ac-
knowledging the page: press the
talking within three seconds after the DTMF
code sequence is sent. The pager resets to receive
a new call as soon as either station fails to re-
spond to the other within three seconds.
One-Touch Paging
One-Touch Paging normally displays the
Code Memory number in place of the 100's-of-
Squelch, DTMF Paging, or Trigger Paging is en-
abled (the rest of the frcgugncy digits remain as
before). The and
Memories,
Code instead of tuning or scanning
operation remains unchanged).
(DIAL
CODE C
repeat-
(PAGE)
and begin
keys rapidly select
One-Touch Paging Display
Selected
To free up (display) the 100's-of-MHz fre-
quency digit for tuning/scanning while in these
modes, you may prefer to disable One-Touch
Paging. DTMF Codes are now only displayed
after pressing (OM)+=,
To toFgle One-Touch Paging on/off, press
.
Use or
to exit.
PTT
Paging "Answer Back''
When you press the
call, the caller's ID code, followed by a DTMF
and your personal ID code, are transmitted.
This informs the calling station that their page
was received. If you prefer, you can have the
FT-51R respond to page calls
.
spond)
Code Memorv
or receiving a page.
knob for
DIAL
to toggle the mode
(
to respond to a page
PTT
automatically
I
or